A&D HV-15KCP Platform Scale Guide: 6/15/30 lb with Printer
- pete8781
- Jul 16
- 3 min read
A&D HV-15KCP at a glance
The A&D HV-15KCP is a triple-range Legal for Trade bench/platform scale with a built-in printer. Searches also appear as A and D HV15KCP, A&D HV 15K CP, HV-15KCP printer scale and 30 lb NTEP bench scale. The complete “CP” suffix matters: the HV-15KCP is the printer-equipped configuration, while related HV-C models may not include the built-in printer.
Triple-range capacity and readability
In pounds, the scale provides 6 lb x 0.002 lb, 15 lb x 0.005 lb and 30 lb x 0.01 lb ranges. Metric ranges are 3 kg x 0.001 kg, 6 kg x 0.002 kg and 15 kg x 0.005 kg; ounce ranges are also supported. Triple-range operation gives finer divisions for lighter loads and automatically increases the division size as gross weight moves into the higher ranges.
The stainless weighing pan measures 9.8 x 9.8 inches (250 x 250 mm), typical stabilization time is about one second, and the manufacturer lists an operating range of 14 °F to 104 °F (-10 °C to 40 °C). Power is supplied by the AC adapter; this model should not be assumed to include battery operation.
Built-in printer and workflow functions
The built-in printer can produce a physical record near the weighing station. Before purchase, confirm the desired ticket content, paper type, date/time requirements and whether the printed record satisfies the business process. Keep compatible replacement paper available and protect the printer opening from debris and moisture.
The indicator includes a color traffic-light comparator and a 10-digit keypad for fast entry of tare and comparator values. Supported modes include general weighing, parts counting and accumulation. Optional interfaces are available for USB, RS-232C and comparator/setpoint outputs, so the exact installed option should be confirmed if the scale must connect to software, a printer other than the built-in unit or process controls.
IP65 base is not the same as a fully submersible scale
A&D describes the scale base as IP65 and uses a membrane to help protect the load cell from water and dust. The rating does not mean the entire indicator/printer assembly can be submerged or pressure washed without limits. Follow the cleaning instructions, keep water out of the printer and connectors, and select suitable chemicals for the stainless pan and surrounding materials.
NTEP and Legal for Trade use
The HV-15KCP is listed with NTEP and Measurement Canada approval. For commercial transactions, confirm the nameplate and certificate match the exact model, install it correctly on a stable level surface, calibrate and seal it as required, and arrange local inspection where applicable. “NTEP” supports type evaluation; it is not a substitute for field approval.
Setup and verification
Install the column securely, level the base, warm up the scale and verify zero. Test with appropriate standards in each part of the working range, including common tare loads, and confirm the printer and comparator behave as expected. Recheck after relocation, repair, interface installation or overload. A display division is not automatically the total measurement uncertainty.
Best-fit applications
The HV-15KCP fits receiving, production, packaging, portioning, inventory and checkweighing workflows that need a compact 30 lb platform, fast stabilization and printed records. Before ordering, confirm maximum gross load, required division size, pan dimensions, cleaning environment, power outlet, print format, paper supply, communication options and local commercial-weighing requirements.
Frequently asked questions
What are the three ranges of the HV-15KCP?
They are 6 lb x 0.002 lb, 15 lb x 0.005 lb and 30 lb x 0.01 lb.
Does the A&D HV-15KCP include a printer?
Yes. The CP configuration has a built-in printer. Confirm paper and desired ticket format for the workflow.
Is the HV-15KCP NTEP approved?
A&D lists NTEP and Measurement Canada approval. Local installation, calibration, sealing and inspection requirements may still apply.
What size is the weighing platform?
The stainless pan is 250 x 250 mm, approximately 9.8 x 9.8 inches.
Can the HV-15KCP run on batteries?
The manufacturer’s specification for this model lists AC-adapter power. Do not assume battery operation unless a verified option is supplied.
What is the difference between HV-15KC and HV-15KCP?
The P identifies the built-in-printer configuration. Always confirm the full model suffix and included interfaces.
Comments