A&D HW-100KC for Warehouse, Shipping, Receiving & Checkweighing
- pete8781
- Jul 31
- 3 min read
Need more details or help choosing the correct item? Call MNM Scales at (832) 290-3120 or email mnmscales@yahoo.com.
A&D HW-100KC warehouse scale applications center on a useful combination: 200 lb capacity, 0.02 lb readability, a large 15.4 × 20.9 in platform, counting, accumulation, and a color comparator. Those features make the model more than a parcel scale; it can serve as a repeatable checkpoint for receiving, packing, kitting, inventory, and production-support weighing.
Receiving: Verify Incoming Material Before It Moves Downstream
Receiving teams can use the HW-100KC to compare incoming cartons, bins, raw materials, or components against expected weights. A 0.02 lb display interval is helpful when the process needs better discrimination than a typical coarse warehouse scale. Keep in mind that a receiving weight check is not a substitute for a certified commercial transaction unless the scale and installation meet the required legal-for-trade rules.
Shipping and Packing
For outbound packaging, use a stable table and keep boxes centered on the 390 × 530 mm platform. The large platform helps prevent cartons from hanging off and touching adjacent surfaces. If shipping software needs weight input, an optional interface may be appropriate, but test the complete workflow with the exact software. A weight sent to a PC is only useful if the software knows when the reading is stable, whether tare is active, and which unit is being transmitted.
Checkweighing for Packaged Goods
The multi-color comparator can turn repetitive packing into a simpler visual task. Configure low and high limits based on the process specification. Operators can then identify under-target, acceptable, and over-target loads without mentally comparing every displayed number. For take-away operations, negative comparison and auto-tare functions can support picking a target amount out of a larger container.
Kitting and Parts Counting
A kit with dozens or hundreds of identical parts can often be checked faster by weight than by hand count. Learn the unit mass from a representative sample, tare the tote, and compare the calculated count with a known kit quantity. If parts vary significantly in mass, increase the sample size or use a different method. Counting performance should be validated against the cost of a miscount rather than assumed from the scale’s numerical resolution alone.
Inventory Cycle Counts
For bins of uniform fasteners or components, the HW-100KC can speed cycle counting. Establish a consistent tare for each container style and keep a controlled unit-weight library if the receiving system supports it. Periodically recount a sample by hand to confirm that suppliers or manufacturing revisions have not changed average part mass enough to bias the calculated quantity.
Accumulation for Batch Totals
Accumulation is useful when a total cannot be placed on the scale at once. Repeated boxes or partial batches can be added to a running total. This can support internal production tracking, material staging, or end-of-shift reconciliation. Define when operators clear the accumulator and how totals are recorded so a previous job does not carry into the next one.
Mobile Warehouse Stations
Four-D-battery operation allows the scale to ride on a cart or move to temporary inventory and QC locations. A&D’s published long battery-life figure assumes low-power conditions; frequent backlight and comparator use will reduce it. For mobile stations, also protect the column/display from impact and recheck level after moving to a new floor location.
Daily Verification Routine
At the start of work, inspect the platform, confirm level and zero, and apply one or more known reference weights covering the loads that matter most. Repeat the same load to check consistency. If readings are unstable, check floor or bench vibration, fan airflow, a touching box, cable tension, or mechanical interference before recalibrating.
Frequently Asked Questions
Is 0.02 lb resolution useful for shipping?
It can be useful when package or process differences smaller than 0.1 lb matter, but carrier billing rules and commercial requirements are separate from scale readability.
Can it total multiple boxes?
Yes. The accumulation function is designed to total repeated weighments.
Can it connect to warehouse software?
Optional USB, RS-232C, and Bluetooth solutions exist in the family. Compatibility depends on the specific software and workflow, so test integration before rollout.
Is the indicator waterproof?
No. A&D’s manual specifically warns that the display unit is not water resistant, even though applicable base units have water-resistant construction.
Comments