top of page

Crane Scales

Compare crane scales with the weight display built into the scale body. All Scales USA lists Brecknell, Optima and MNM Scales models for process weighing. Start with capacity, displayed increment, display type and power, then check the exact package contents. A scale's weighing capacity does not establish the rating or suitability of an entire lifting system.

Choose the weighing range and displayed increment

Capacity is the maximum rated weighing range; readability is the display increment. Compare both with your expected gross weight and the smallest difference you need to measure. A finer display does not by itself establish measurement accuracy. For lighter handheld or mechanical options, compare hanging scales.

Compare five integrated crane-scale configurations

The Brecknell CS-1000 provides 1,000 lb capacity with 0.5 lb readability, while the CS-2000 provides 2,000 lb with 1 lb readability. Both use a 1.2-inch LED display, rechargeable power and remote controls. Brecknell specifies approximately 20 hours between charges for the CS series.

For a smaller displayed increment at 1,000 lb capacity, the Optima OP-924A-1000 reads in 0.2 lb steps and has a red LED display. The OP-924B-2000LCD combines 2,000 lb capacity, 0.5 lb readability and a backlit LCD. Both belong to Optima's rechargeable OP-924 family. The A and B display versions are different configurations, so check the full model suffix.

The Optima OP-925A-6000 increases capacity to 6,000 lb with 1 lb readability and a red LED display. Its rechargeable battery and wireless remote support portable weighing. Optima specifies up to 80 hours for the OP-924 and OP-925 families; actual runtime depends on use and battery condition.

Check display, controls and package contents

Think about where the readout must be visible and whether you need zero, tare or hold from the remote. A wireless control is not automatically a separate weight display. If your application calls for a load cell wired to a separate indicator, compare S-type kits.

The linked CS listings include the scale, remote, rechargeable battery, charger and supplied hook/shackle hardware. The linked Optima listings include the scale, remote and charger. Confirm the exact packing list rather than assuming extra slings, shackles, batteries or calibration documentation. Match replacement batteries and power supplies to the actual model and electrical specifications.

Verify the application before ordering

Weighing capacity, overload figures and trade approval are separate from lifting-system suitability. Have a qualified professional verify the complete installation and follow the manufacturer's instructions. Call All Scales USA at (832) 766-5410 with your weighing range, required increment and application; use Houston-area scale service for calibration inquiries.

bottom of page