(832) 766-5410
(281) 656-2666
(832) 290-3120
All Scales USA · Cypress, TX · Industrial scales & Houston calibration
Pharmacy Balances
Compare A&D GF-P pharmacy balances by capacity, displayed increment and the requirements of your weighing procedure. The GF-200P and GF-300P listings offer 210 g and 310 g capacities with 0.001 g readability. Before ordering for prescription work, confirm the exact configuration, applicable approvals and the performance checks your pharmacy requires.
Choose between GF-200P and GF-300P
The A&D GF-200P pharmacy balance has a 210 g capacity. The A&D GF-300P pharmacy balance increases that capacity to 310 g. Both provide 0.001 g readability, external calibration, a 128 by 128 mm weighing pan and an RS-232 interface. Choose enough capacity for the material plus every container resting on the pan. Taring the container subtracts its displayed weight, but it still uses part of the balance's capacity.
The higher-capacity GF-300P gives more room for a heavier container or batch while retaining the same displayed increment. Confirm current availability, the supplied breeze break and any required cable or interface before placing an order, especially when replacing an existing GF-P installation.
Distinguish displayed resolution from verified performance
A&D's published Certificate of Conformance 04-077 lists the GF-200P and GF-300P as Class II with a displayed division, d, of 0.001 g and a verification interval, e, of 0.01 g. These values describe different characteristics of the balance. A 1 mg display does not by itself establish that a 1 mg sample can be weighed suitably for your procedure.
Have the responsible pharmacist or quality lead specify the smallest net quantity, required tolerance and performance checks before selecting equipment. Where USP balance requirements apply, assess the balance over its intended operating range under the applicable procedure. The model name or NTEP certificate alone does not establish compliance with every pharmacy or compounding requirement. For commercial weighing, also confirm the exact unit's markings and local requirements; the legal-for-trade category provides a route to compare other configurations.
Prepare the bench and calibration routine
Allow space for containers inside the breeze break, provide a stable weighing surface and follow the manufacturer's warm-up, leveling and cleaning instructions. Choose calibration weights that match the specified mass and required tolerance. Establish documented checks between calibrations through your quality procedure, and verify compatibility before connecting the balance to a printer or computer.
Match other weighing needs separately
Browse analytical balances if your laboratory procedure requires a finer displayed increment, or explore A&D balances and scales for other capacities and applications. Confirm suitability for the intended prescription or laboratory task individually. For help comparing the listed GF-P models or discussing Houston-area calibration service, call All Scales USA at (832) 766-5410 with your model, container weight and required weighing range.





