MNM MS70-10K-TC 10,000 lb x 2 lb S-Type Load Cell Scale Guide

BUY NOW FROM USA

Call MNM Scales at (832) 290-3120 or email mnmscales@yahoo.com for product details, current availability, and help confirming the correct force-scale configuration for your application.

MNM MS70-10K-TC 10,000 lb x 2 lb S-Type Load Cell Scale Guide

The MNM MS70-10K-TC 10,000 lb x 2 lb S-type load cell scale is a calibrated tension/compression force-measurement system built around an alloy-steel S-beam and digital indicator. Its 10,000 lb capacity, 2 lb displayed increment, Peak Hold function, rechargeable power and RS-232 interface make it a practical option for controlled pull tests, hoist and winch checks, cable-force measurement, test stands and industrial force verification.

Verified specifications and included features

• Capacity and readability: 10,000 lb x 2 lb.

• Sensor: alloy-steel S-type load cell; MNM listing states NTEP.

• Peak Hold for capturing a maximum force event during a controlled test.

• Digital indicator with 6-digit display, lb/kg units, zero, gross/net, accumulation, printing, counting, check weighing and auto-hold functions listed by MNM.

• RS-232 communications and gravity adjustment are listed indicator functions.

• Rechargeable 6 V battery/power supply arrangement and two eye bolts are included according to the listing.

• Indicator specification language lists 6000e, up to 30,000 displayed divisions, 0.3 µV/e sensitivity and support for multiple 350-ohm load cells.

What 10,000 lb x 2 lb means in practice

Capacity and displayed increment solve different problems. The 10,000 lb rating describes the intended measuring range, while the 2 lb increment is the smallest displayed step in the configured system. A 2 lb display can be appropriate for heavy industrial pull and proof-style measurements where stability, alignment and safe fixture design matter more than seeing fractions of a pound. It should not be interpreted as a statement that every reading is automatically accurate to ±2 lb; measurement uncertainty also depends on calibration, mechanics, load introduction, temperature, repeatability and the condition of the sensor and electronics.

Setup and installation

1. Inspect the S-beam, eye bolts, cable and indicator before applying load. Do not use damaged threads, bent hardware or a cut load-cell cable.

2. Mount the load cell so the force passes through its intended axial load path. Avoid side load, torsion, binding and fixtures that can contact the sensor body.

3. Power the indicator, allow the reading to stabilize, unload the system and establish zero before beginning a test.

4. Apply a modest known force first and confirm polarity, stability and return to zero before using higher loads.

Applications and search use cases

Common search intent around a 10,000 lb S-type load cell includes winch pull testing, hoist force measurement, cable tension testing, actuator thrust, industrial test stands, manufacturing QC, suspended-force measurement and replacement of a calibrated tension/compression system. For controlled hoist, winch and proof-load work, see the dedicated MS70-10K-TC application guide in this cluster. Buyers comparing display increments should also review the 10,000 lb 0.5 vs 1 vs 2 lb resolution comparison.

Calibration and verification

The exact indicator model is not identified on the public product listing, so service-menu button sequences should not be borrowed from an OP-901, LP7515 or other display unless the shipped indicator is first identified. The correct workflow is to verify the mechanical setup, establish an unloaded zero, perform span calibration with a safe known reference force using the actual indicator manual, then check several points through the working range for repeatability and return to zero. A dedicated calibration article in this cluster explains the process in more detail without inventing a menu sequence.

Maintenance and troubleshooting

• Reading will not return to zero: remove load and check for fixture binding, cable pull, side force or mechanical contact.

• Reading drifts: allow temperature stabilization, inspect connectors/cable and confirm the force is steady rather than slowly changing.

• Peak Hold seems inconsistent: verify test rate and fixture repeatability, then compare static readings before blaming the Peak Hold function.

• Large error after repair or sensor replacement: recalibrate zero and span and confirm the replacement sensor/electronics are electrically and mechanically compatible.

Frequently asked questions

Is this a crane scale? It is an S-type load-cell force system that MNM markets for crane/hanging and tension/compression applications. The sensor should be used within a properly engineered test or weighing setup rather than treated as rigging hardware by itself.

Does it measure compression as well as tension? The product is listed for tension/compression measurement. The fixture must introduce force axially and safely in the intended direction.

What is Peak Hold useful for? It helps capture the highest displayed force during a transient pull, breakaway or controlled loading event.

Can it connect to a computer? The listing states RS-232 capability. Confirm the actual port/cable and output format supplied with the indicator before designing data collection around it.

Is 2 lb resolution enough? It can be a good match for heavy force work where the decision threshold is much larger than a few pounds. Finer-resolution 10,000 lb systems are better when small force changes matter and the mechanical setup is stable enough to make those extra digits useful.

Where can I buy it? Use the exact MNM Scales product page linked below or contact MNM directly for current configuration and application questions.

Where to buy

Exact MNM product page: https://mnmscales.com/product/10000-lb-calibrated-s-type-load-cell-indicator-crane-scale-tension-compression/