MNM Prime Floor Scale 15 ft 4-Pin to 4-Pin Indicator Cable Guide

BUY NOW FROM USA

Call MNM Scales at (832) 290-3120 or email mnmscales@yahoo.com for help confirming the correct floor-scale cable and connector before ordering.

MNM Prime Floor Scale 15 ft 4-Pin to 4-Pin Indicator Cable Guide

The MNM Prime floor scale 15 ft 4-pin-to-4-pin indicator cable is a replacement cable for Prime scale bases using compatible PS-IN202 LED/LCD or PS-IN108 indicators. MNM currently lists the exact cable at $39 with stock available. The product uses a four-pin round connector at both ends, four 20 AWG copper conductors and encased braided shielding.

What the listing confirms

Length is 15 feet. Both ends use round four-pin connectors. The cable has four 20 AWG copper wires and braided shielding. MNM specifically names Prime floor scales with PS-IN202 LED/LCD and PS-IN108 indicators. The jacket may be orange, black or gray depending on availability; MNM states that the color difference does not change function.

Why a four-pin connector is not enough to prove compatibility

Two cables can use the same physical connector while assigning excitation and signal to different pins. This MNM product is sold for the named Prime/PS-IN systems. Do not use connector shape alone to assume compatibility with unrelated indicators or bases. If adapting another system, verify pinout and electrical function with documentation or a qualified scale technician.

Installation basics

Power the indicator down before replacing the cable. Inspect both mating connectors for bent pins, corrosion or loose shells. Route the cable away from sharp edges, forklift paths, motors, VFD power wiring and hot surfaces. Leave enough strain relief for movement without allowing loops that can be crushed. Tighten connectors securely without cross-threading or over-torquing.

Does replacing the cable require calibration?

A like-for-like cable replacement normally does not change the load cell mechanically, but the scale should still be verified with zero and a known test weight after service. If the old cable had high resistance, intermittent conductors or a wiring error, the displayed weight may change when the fault is removed. Legal-for-Trade scales may require additional service documentation or sealing procedures.

Common buying questions

Is the cable always orange? No; MNM says orange, black or gray may ship. Is it four-pin on both ends? Yes, the listing specifies 4+4 regular round connectors. Is it for PS-IN202? MNM specifically names PS-IN202 LED/LCD and PS-IN108. Does it include a load cell? No, it is the interconnect cable between compatible floor-scale equipment. Is there a longer option? MNM also lists a special 30 ft 4-pin-to-4-pin Prime cable.

MNM product URL: https://mnmscales.com/product/mnm-scales-cable-44-regular-connectors-indicator-for-prime-scales-floor-scale/