(832) 766-5410
(281) 656-2666
(832) 290-3120
All Scales USA · Cypress, TX · Industrial scales & Houston calibration
Calibration Weights
Choose calibration weights by the mass your balance requires, then confirm the accuracy and documentation your procedure needs. This category lists individual 5 g, 10 g, and 20 g weights for compatible balances. Check each product before ordering, especially when your work calls for a stated class or calibration certificate.
Match the weight to the balance procedure
Start with the balance manual and the purpose of the test. Capacity tells you the instrument's maximum load; it does not, by itself, tell you which calibration mass to buy. External adjustment may require a particular mass, while a routine verification procedure may specify several test points and acceptance limits. Write down the balance model, capacity, readability, required mass, and tolerance before choosing a weight.
The same check applies when selecting weights for precision balances or compact bench scales. Follow the instructions for the exact instrument rather than assuming that every balance in a category uses the same mass.
Compare the three individual weights
The 5 g calibration weight is listed as one individual mass for balances that specify 5 g. The 10 g calibration weight serves procedures calling for 10 g, while the 20 g calibration weight provides the larger nominal mass shown in this category. These listings are individual pieces. They do not describe complete multi-weight sets, and a case or forceps is not confirmed as included.
Check class, material, and certificate separately
A gram value identifies nominal mass. An ASTM or OIML class adds defined requirements, including permissible error; a calibration certificate supplies documentation for the particular weight. These are separate purchase details. For sensitive work with analytical balances, use the instrument requirements and your quality procedure to determine the needed tolerance and documentation.
The three product pages do not specify material, an ASTM or OIML class, or an included calibration certificate. Confirm those details before purchase if your procedure requires stainless steel, a particular class, or traceable results. A certificate of calibration and a simple statement of accuracy are not interchangeable. Where required, check that documentation identifies the weight and reports its measured value or correction, uncertainty, and traceability.
Protect the weight between checks
Keep weights clean and protected from scratches, dust, and handling residue. Use suitable clean gloves or handling tools, and follow the weight supplier's care instructions. Confirm storage and handling accessories separately. Record routine checks against your procedure's limits; checking an indication and changing the balance's adjustment are different steps.
Need help matching a weight?
Call All Scales USA at (832) 766-5410 with your balance model, required mass, and documentation requirements. Confirm the exact weight and any needed certificate before ordering.




