A&D HW-60KC for Checkweighing, Production, Packing & Inventory
- pete8781
- Jul 31
- 4 min read
Need more details or help choosing the correct item? Call MNM Scales at (832) 290-3120 or email mnmscales@yahoo.com.
The A&D HW-60KC checkweighing and production scale gives internal-process users a useful combination: 150 lb capacity with 0.01 lb readability across the single range, a 330 × 424 mm platform, comparator lights, counting, accumulation and optional communications. It is designed for process work rather than legal-for-trade transactions. Current NTEP CoC 17-099A3 covers the related HV-C/HV-CP/HV-CWP models, not HW-C; when a 150 lb A&D platform must determine a commercial sale by weight, the certified sibling to evaluate is HV-60KC.
Production checkweighing
For repetitive production checks, program lower and upper limits from the actual process tolerance rather than from the scale's last displayed digit. The multicolor comparator lets operators identify under, acceptable and over conditions quickly. Start each shift by confirming zero and applying a known check weight. If a station is moved, hit by a cart or exposed to a large temperature change, re-verify before trusting pass/fail decisions. A comparator can speed the judgment, but the scale still needs a sound verification program behind it.
Packing, fill control and fulfillment
The medium 330 × 424 mm platform fits many cartons, tubs and totes. Tare reusable packaging to display net product and use comparator limits to flag underfill or excess giveaway. The 0.01 lb process division can reveal small differences that are hidden on coarser warehouse scales. For carrier shipping, remember that freight charges can also depend on dimensional weight. For retail packages sold by declared net weight, determine whether the weighing step is legally regulated and use approved equipment where required instead of assuming the internal HW station can serve both roles.
Batching and formulation
HW-60KC works well for non-trade batching where a relatively large vessel needs finer resolution than a typical floor or shipping scale. Place the empty vessel on the pan, tare it and add material gradually toward the target. Keep the entire vessel on the platform without touching rails, walls or hoses. For liquids or shifting loads, wait for a stable value when the procedure requires equilibrium rather than relying on hold to hide motion. Define acceptable overshoot and correction steps in the batch instruction before the operator begins.
Receiving and incoming inspection
Receiving teams can use package or lot weight as a fast screening tool for missing components, incorrect pack counts or supplier changes. Establish expected ranges for known SKUs and verify the scale with a meaningful test load, not just a very small weight near zero. If weight becomes a formal acceptance criterion, document the check-weight status, station ID and tolerance. A 0.01 lb display is useful, but the acceptance decision should be tied to the process requirement and validated measurement capability.
Parts counting and kitting
Counting mode can speed inventory for hardware, castings and other reasonably uniform parts. Establish unit mass from a representative sample and increase sample size when individual pieces are light or variable. A large tote can remain on the 150 lb platform while the operator counts its contents by weight. Validate the setup with a known manual quantity before scaling up to large counts; a small average-piece-weight error becomes a large count error when hundreds or thousands of parts are involved.
Accumulation for repeated loads
Accumulation lets the station total multiple weighments, useful when a shipment or batch must be split across containers. Confirm that each accepted weight is stable before adding it to the total and give operators a way to detect an accidental double-add or missed load. If the accumulated result is a critical production record, transmit or independently record the individual weighments so an incorrect total can be reconstructed.
IP65 base does not mean a waterproof terminal
A&D rates the HW-60KC base IP65, and the manual allows the base to be cleaned with gentle running tap water. The same manual explicitly says the display unit is not water resistant. Protect the terminal, keypad and electrical connections from spray. This matters for food-adjacent production, wet receiving and cleanup areas: the weighing base is more tolerant of moisture than a basic bench scale, but HW-60KC is not a fully sealed washdown system from pan to indicator.
Mobile station or fixed station?
Four D-cell batteries allow mobile use, and A&D lists approximately 1,200 hours under low-power conditions with backlight/comparator LEDs off. A fixed station can use the AC adapter and optional RS-232C, USB or relay interfaces. A&D also lists Bluetooth-related options in the family. Mobile stations need special attention to leveling and floor/bench rigidity after every move; a 0.01 lb display can reveal vibration or rocking that a coarse warehouse scale might hide.
Data capture and automation
Optional HVW-02CB USB, HVW-03C RS-232C and HVW-04C relay/buzzer/contact input let the scale participate in digital records or simple process control. Decide whether the system needs raw weights, stable-only values, comparator status or external commands. Test the complete data path with known weights before production. Store units and station identity with the number so a value such as 125.00 cannot later be mistaken for kilograms, pounds or a value from another workstation.
When to choose HV-60KC instead
Choose HV-60KC when the scale itself must be a Class III legal-for-trade 150 lb platform. Current CoC 17-099A3 certifies HV-60KC at 0–30 lb × 0.01 lb, 30–60 lb × 0.02 lb and 60–150 lb × 0.05 lb. HW-60KC is better when the priority is internal high-resolution process weighing at 0.01 lb all the way to 150 lb. The two models serve different metrological purposes even though they share the same general platform architecture and many workflow features.
Frequently asked questions
Is HW-60KC good for checkweighing? Yes, with comparator limits and LEDs. Can it count parts? Yes. Can it accumulate several weighments? Yes. Is HW-60KC NTEP? No current CoC covers HW-C; CoC 17-099A3 covers HV-C/HV-CP/HV-CWP. Which related 150 lb model is legal for trade? HV-60KC. What size is the HW-60KC platform? 330 × 424 mm. Is the whole scale waterproof? No; the base is IP65 while the display is not water resistant. Can weights be captured electronically? Yes, with optional USB, RS-232C or other supported interfaces.
Comments