A&D FS-30Ki Checkweigh Scale, 70 lb × 0.005 lb, IP65
The A&D FS-30Ki is a stainless-steel checkweigher for portioning, packing and filling. Colored HI/OK/LO lamps and an analog sweep display make it easy to compare a load against stored targets.
Specifications
- Capacity: 70 lb / 30 kg.
- Selectable readability: 0.005, 0.01 or 0.02 lb / 2, 5 or 10 g.
- Pan: 380 × 300 mm / 15.0 × 11.8 in.
- Protection: IP65 dust and water-jet resistance; keep the AC plug dry.
- Display: 18.6 mm backlit LCD with 60-segment analog display; approximately 10 updates per second.
- Comparator memory: 100 target/limit settings.
- Repeatability: 0.005 kg standard deviation; linearity: ±0.01 kg.
- Power: 100–240 VAC; rechargeable battery operation requires the optional pack.
- Operating environment: -10–40°C / 14–104°F, below 85% relative humidity.
Included equipment
Scale assembly with column indicator, stainless pan, AC mains cord and instruction manual. Calibration weights and the rechargeable battery are sold separately.
Options and compatibility
Options include the FS-01i wall bracket, rechargeable battery, FS-03i RS-232C/comparator relay or FS-04i RS-422/485/comparator relay. The two interface boards cannot be used together. The FS-C extension column is available for this model. Confirm regional accessory compatibility before ordering.
Warranty
2-year limited warranty.
Commercial-use requirements
Original NTEP CC 07-104 lists FS-30Ki in Class III at 70 lb / 30 kg, using the NORMAL division of 0.02 lb / 10 g. Higher-resolution settings are for non-trade use. Commercial use requires an eligible marked unit, the correct configuration, intact calibration seal and local placing-in-service approval. The identification badge is on the indicator side; a wire seal through the rear thumbscrews protects calibration access.
Manuals and documents
Photo guide
Photos show the FS-30Ki wide-pan configuration, including a manufacturer washdown demonstration. Column height and regional control labels can vary; any optional extension column is supplied only when ordered.
Contact Us
Questions on compatibility, calibration, or what is in the box? All Scales USA, 21249 FM 529 Rd, Cypress, TX 77433. Call (832) 766-5410 or email pete@allscales.com. Also: (281) 656-2666 · (832) 290-3120.
Model
FS-30KiProduct Type
Checkweighing Scales


