top of page
A&D FS-30Ki assembled checkweigher with wide stainless pan

A&D FS-30Ki Checkweigher, 70 lb × 0.005 lb

SKU: 2R-YZ20-QYDR

The A&D FS-30Ki is a stainless-steel checkweigher for portioning, packing and filling. Colored HI/OK/LO lamps and an analog sweep display make it easy to compare a load against stored targets.

  • Specifications

    • Capacity: 70 lb / 30 kg.
    • Selectable readability: 0.005, 0.01 or 0.02 lb / 2, 5 or 10 g.
    • Pan: 380 × 300 mm / 15.0 × 11.8 in.
    • Protection: IP65 dust and water-jet resistance; keep the AC plug dry.
    • Display: 18.6 mm backlit LCD with 60-segment analog display; approximately 10 updates per second.
    • Comparator memory: 100 target/limit settings.
    • Repeatability: 0.005 kg standard deviation; linearity: ±0.01 kg.
    • Power: 100–240 VAC; rechargeable battery operation requires the optional pack.
    • Operating environment: -10–40°C / 14–104°F, below 85% relative humidity.
  • Included equipment

    Scale assembly with column indicator, stainless pan, AC mains cord and instruction manual. Calibration weights and the rechargeable battery are sold separately.

  • Options and compatibility

    Options include the FS-01i wall bracket, rechargeable battery, FS-03i RS-232C/comparator relay or FS-04i RS-422/485/comparator relay. The two interface boards cannot be used together. The FS-C extension column is available for this model. Confirm regional accessory compatibility before ordering.

  • Warranty

    2-year limited warranty.

  • Commercial-use requirements

    Original NTEP CC 07-104 lists FS-30Ki in Class III at 70 lb / 30 kg, using the NORMAL division of 0.02 lb / 10 g. Higher-resolution settings are for non-trade use. Commercial use requires an eligible marked unit, the correct configuration, intact calibration seal and local placing-in-service approval. The identification badge is on the indicator side; a wire seal through the rear thumbscrews protects calibration access.

  • Photo guide

    Photos show the FS-30Ki wide-pan configuration, including a manufacturer washdown demonstration. Column height and regional control labels can vary; any optional extension column is supplied only when ordered.

  • Contact Us

    Questions on compatibility, calibration, or what is in the box? All Scales USA, 21249 FM 529 Rd, Cypress, TX 77433. Call (832) 766-5410 or email pete@allscales.com. Also: (281) 656-2666 · (832) 290-3120.

  • Model

    FS-30Ki
  • Product Type

    Digital Scales
$1,254.00Price
Quantity
bottom of page