A&D SW-150KL Super Washdown, 330 lb × 0.05 lb, NTEP
The A&D SW-150KL is a large-platform Super Washdown scale for demanding wet-process areas. A bright LED display and five-step comparator support routine weighing and target checks.
Specifications
- Capacity: 330 lb / 150 kg / 5,200 oz.
- Factory/approved division: 0.05 lb / 0.02 kg / 1 oz; alternative non-trade settings are 0.1 or 0.02 lb / 0.05 or 0.01 kg / 2 or 0.5 oz.
- Pan: 390 × 530 mm / 15.4 × 20.9 in.
- Construction: SUS304 pan/frame, hermetically sealed SUS630 load cell and heat-resistant ABS indicator.
- Protection: IP68/IP69K in the standard configuration; keep the AC plug dry.
- Display: 14.6 mm LED with capacitive controls.
- Repeatability: 0.02 kg standard deviation; linearity: ±0.05 kg.
- Counting: 1 g minimum unit weight; up to 150,000 pieces.
- Power: 100–240 VAC; optional rechargeable SLA battery, approximately 90 hours depending on use.
- Overall dimensions: 390 × 751 × 722.5 mm with column; approximately 16.2 kg.
Included equipment
Scale assembly with column indicator, stainless pan, AC mains cord and instruction manual. Battery, interfaces and brackets are optional.
Options and compatibility
Choose SW-03 RS-232C/comparator relay or SW-04 RS-422/485; the two cannot be used together and either removes IP69K compliance. The SW-11 desktop/wall bracket and rechargeable pack are separate accessories. Confirm regional pack compatibility before ordering.
Warranty
2-year limited warranty.
Commercial-use requirements
Original NTEP CC 11-078 lists SW-150KL in Class III at the approved division shown above. Commercial use requires an eligible marked unit, correct settings, intact calibration seal and local placing-in-service approval. Identification is on the indicator; the calibration access is sealed underneath. The counting function is not legal for trade.
Photo guide
The image shows the manufacturer's large-platform SW configuration. Capacity markings can vary within the family.
Contact Us
Questions on compatibility, calibration, or what is in the box? All Scales USA, 21249 FM 529 Rd, Cypress, TX 77433. Call (832) 766-5410 or email pete@allscales.com. Also: (281) 656-2666 · (832) 290-3120.
Model
SW-150KLProduct Type
Washdown & Food Scales


