A&D SK-1000WP for Food Portioning, Wet Prep & Ingredients
- pete8781
- Jul 31
- 2 min read
Need more details or help choosing the correct item? Call MNM Scales at (832) 290-3120 or email mnmscales@yahoo.com.
A&D SK-1000WP for food portioning and wet preparation combines 1000 g capacity, 0.5 g readability, NSF-compliant stainless construction and IP65 battery-powered protection. It is designed for small portions and ingredients that need frequent cleanup without moving to a larger, coarser food scale.
Review the complete SK-1000WP buyer guide for model and approval details. For post-clean checks and external calibration, follow the SK-1000WP cleaning and calibration guide.
Small food portions and recipe preparation
Use the scale for sauces, toppings, deli ingredients, seafood portions, bakery components and other loads below 1000 g. The 0.5 g display is useful for portion decisions that are too fine for 1 g or 2 g bench scales. Select a container that leaves enough capacity for the product; tare changes the displayed zero but does not remove the container’s physical weight from the load cell.
Seafood, meat and damp products
IP65 and a removable stainless pan help where moisture and residue are expected. Use trays or liners when appropriate, keep liquid from pooling around controls and clean between product types. IP65 supports water-jet resistance but not submersion. For harsher high-pressure or hot-water sanitation, choose equipment with the required higher enclosure rating.
Battery-powered prep stations
Six D batteries provide long operation without a cord near the wet station. This also preserves the SK-WP IP65 configuration. When the optional adapter is connected, A&D says the series is no longer IP65-compliant. Keep the adapter and outlet away from splash zones and disconnect before wet cleaning.
Commercial food sales
When product price is calculated from weight, confirm the delivered scale is the approved SK-1000WPF legal-for-trade configuration and complete any local placement-in-service requirements. MNM may market the product under the shorter SK-1000WP name, so verify the physical nameplate rather than relying only on the web-page title.
Daily verification
Before important portions or transactions, confirm zero and apply a suitable known check weight. Verify again after the scale is dropped, moved or heavily cleaned. If the reading is unstable, check vibration, product movement, trapped residue and low batteries before changing calibration.
Frequently asked questions
Good for seafood and wet prep? Yes within IP65 limits. Can it weigh more than 1000 g after tare? No. Is it suitable for tiny sub-gram laboratory work? It reads 0.5 g and is a food/process scale, not an analytical balance. Can it remain plugged in during washdown? The adapter removes IP65 compliance. Is it legal for customer sales? Confirm the supplied SK-1000WPF approved configuration and local requirements. Should it be checked after cleaning? Yes.
Comments