(832) 766-5410
(281) 656-2666
(832) 290-3120
All Scales USA · Cypress, TX · Industrial scales & Houston calibration
Bench Scales
Choose a bench scale around the container, working surface and weighing task. Compare the listed A&D models for packing, receiving and production by capacity, displayed increment, platform size and power. The guide below also separates process weighing from approved trade models and explains when a built-in printer is useful.
Start with the whole load and working space
Add the container weight to the heaviest contents before choosing capacity. Taring a container changes the displayed net weight but does not increase the scale's load limit. Check that the bench supports both the scale and its load, and that the container clears the display. Readability describes the displayed increment; it is not the same as measurement accuracy.
Compare two low-profile process benches
The A&D FG-30KBM offers 60 lb capacity with 0.005 lb readability. The FG-60KBM increases capacity to 150 lb with 0.01 lb readability. Both use an 11.8 by 15.0 inch stainless pan and a detachable display without a column. Choose the smaller capacity for finer displayed increments within its load limit, or the larger capacity for heavier cartons on the same pan footprint.
These FG models can run from an AC adapter or four C batteries. Their HI/OK/LO comparator helps check a target weight; their counting mode estimates quantity from a sample of equal-weight parts. Compare dedicated counting scales if counting, rather than weight alone, drives your workflow. RS-232 output requires an optional interface.
Check trade approval before choosing finer resolution
The FG-60KBMN is the NTEP version with the same 11.8 by 15.0 inch pan, 150 lb capacity and a coarser 0.05 lb increment. The FG-30KBM and FG-60KBM above are process models. For sales or billing by weight, review legal-for-trade scales and confirm the exact configuration and local installation requirements. The FG counting function is not approved for trade.
Need printed records or heavier batches?
The A&D HW-60KCP combines 150 lb capacity and 0.01 lb readability with a 330 by 424 mm pan and built-in printer. It operates on AC power only. The HW-200KC carries up to 500 lb in 0.05 lb increments on a larger 390 by 530 mm pan; it has no built-in printer and supports AC or four-D-battery operation. Both are process-weighing models, with optional USB and RS-232 interfaces.
Match cleaning and calibration to the installation
The HW models' IP65 rating applies to the base, so check the indicator and cleaning procedure separately. For regularly wet work, compare washdown scales before ordering. Level the scale on a stable surface and follow its calibration instructions after installation or relocation. Select calibration weights for the model and procedure. Call (832) 766-5410 with your load range, container dimensions and required output.





















