(832) 766-5410
(281) 656-2666
(832) 290-3120
All Scales USA · Cypress, TX · Industrial scales & Houston calibration
Medical & Physician Scales
Choose medical and physician scales around how a person reaches and uses the weighing surface. Compare standing scales with height rods, seated mechanical models and roll-on wheelchair platforms in the current range. Capacity, usable space, handrail arrangement, power and data connections help narrow the choice before you select an exact model.
Start with access and total load
Decide whether weighing will take place standing, seated or in a wheelchair. A handrail provides a handhold while standing; plan any required transfer assistance separately. For wheelchair weighing, check the combined weight of the person, chair and anything carried on it. Taring the chair removes its weight from the displayed result, but does not increase the scale's capacity.
Combine standing weight and height
The Brecknell HS-300 physician scale provides 660 lb capacity with 0.2 lb increments on a 20.5 by 20.5 inch platform. Its mechanical height rod covers 2 to 7 feet in 0.125 inch increments. A handrail, backlit display and transport rollers make it a distinct option when both standing weight and height measurements are required.
Compare seated and roll-on designs
The Brecknell CS-200M chair scale uses a mechanical beam with 440 lb capacity and 4 oz increments. Its plastic seat measures 16 by 14 inches, with lift-away arms and locking rear wheels. Check seat fit and the planned transfer procedure before choosing this design.
The Brecknell MS1000-LCD wheelchair scale listing specifies 1,000 lb capacity and 0.2 lb increments. Its low platform has built-in entry and exit ramps and a fixed handrail. Measure wheelchair width and wheelbase against the usable flat deck and rail clearance, then allow room to approach and leave the ramps.
Plan power and recording
The HS-300 includes an AC adapter, four AAA batteries and an RS-232 cable. The current MS1000-LCD configuration offers USB virtual COM and RS-232 connections, plus hold modes for recording a reading. It operates from the supplied adapter or six AA batteries, which are not included. The mechanical CS-200M needs no electrical power.
A communication port alone does not establish compatibility with a records system. Confirm the receiving device, data format and scale cable connection before ordering accessories.
Check the installation and ongoing routine
Use a firm, level location and follow the model's leveling, cleaning and operating instructions. Recheck stability after moving the scale. Browse the wider Brecknell range or discuss scale calibration service with All Scales USA. Call (832) 766-5410 with the expected total load, access measurements and recording requirements.
















