(832) 766-5410
(281) 656-2666
(832) 290-3120
All Scales USA · Cypress, TX · Industrial scales & Houston calibration
Tank & Hopper Kits
Choose a tank or hopper weighing package by the complete vessel, its support arrangement and the weight you need to measure. Compare MNM single-disk compression kits with multi-cell tank packages, then check the supplied indicator, wiring and mounting requirements. Listed capacities and display increments must be reviewed against the finished installation.
Start with the vessel and its load path
Record the empty vessel weight, maximum contents, number of supports and any attached equipment before choosing a kit. A cell-and-indicator package is only part of a vessel weighing system. A qualified system review should consider support strength, unequal loading, thermal movement and forces from piping or other connections. The summed cell ratings do not establish the safe working capacity of a tank installation.
Compare single-disk compression packages
The MNM LPD-25K compression kit is listed at 25,000 lb with 1 lb display increments. It includes one low-profile disk cell, a portable LED or LCD indicator, rechargeable battery, power cord and load-cell certificate. Confirm which indicator is supplied; mounting hardware and application-specific fixtures are not assumed to be included.
The MNM LPD-100K 100,000 lb × 10 lb kit uses one higher-capacity compression disk with a portable indicator, rechargeable battery, power cord and cell certificate. Other LPD-100K listings have different increments, so match the exact package to your requirement. A single-cell package is not a complete multi-support tank system, and a cell certificate does not certify a finished vessel scale.
Check what a multi-cell tank kit includes
The MNM four-cell LPD-50K tank kit is listed as a 200,000 lb × 5 lb package. Its listing identifies four 50,000 lb disk cells, a stainless-steel indicator, rechargeable battery and AC adapter. Confirm the junction box, cable arrangement, mounting assemblies and restraints needed for your vessel rather than assuming every item is included. The published package rating still needs application-specific mechanical review.
Confirm the measurement and connection requirements
Display readability is the size of the indicated step, not a guarantee of installed accuracy. Identify the smallest weight change your process must reliably detect and how the completed system will be calibrated. Review the exact indicator documentation for cell input, power, connectors and any printer or control-system output. Do not assume a portable display provides batching control or a required industrial interface.
These featured packages are listed for process weighing, not as complete legal-for-trade scales. For sales based on weight, discuss legal-for-trade requirements before specifying the system. If you need only a replacement sensor, compare load cells using the existing cell identification and mechanical drawings. Call (832) 766-5410 with the vessel details and intended measurement.










