top of page
Search

Amcells LPD Load Cell Cable: How We Match the Connector in Cypress

People still type Amcells load cell cable into Google and land on us. The live name on the carton is MNM Scales. Always MNM Scales — that is the house brand on the LPD disk we ship from Cypress. We do not have a spare LPD cable sitting in the cart tonight. If you need a replacement lead, call (832) 766-5410. Do not add a floor-scale homerun from the cables leaf and hope the connector seats.

MNM Scales LPD-100K 100,000 lb compression disk load cell kit with stainless indicator

What the live LPD listing actually includes

The live kit is MNM Scales LPD-100K compression kit, 100,000 lb × 2 lb — $1,250. Cell is an LPD-100K / LPD-CT-100K 100,000 lb low-profile disk. Rated output 4 mV/V. Input / output resistance 385 Ω / 350 Ω. Cable on that page: 20 ft, 4-wire. Nickel-plated tool steel, IP67. Interchange notes on the page: Interface 1211, Celtron LCD, Emery Winslow 1211. Stainless digital indicator with hold, built-in rechargeable battery, and AC adapter. The assembled kit is process — not a complete legal-for-trade scale. We will not print NTEP on the hanging assembly.

Need the disk only? That is MNM Scales LPD-CT-100K compression disk, 100,000 lb — $598. Sister-site matches we fetched at HTTP 200: MNM Scales LPD-CT-100K cell and MNM Scales LPD-100K with stainless indicator. Increments on sister pages can differ. Order from the All Scales carton you actually want.

Why there is no Add-to-cart cable

We queried the live scale cables and connectors leaf. Nineteen cables are on that page — Digiweigh DWP-102E, Brecknell SBI-505, Brecknell 200E, OP-902 / LP7515, Prime Scales 4+4 homeruns, Sartorius data leads. None of them is an LPD disk lead. A 15 ft 5-pin SBI cable will not make an LPD cell talk. If your 20 ft 4-wire is cut, chewed, or missing the connector, that is a call-in. Call (832) 766-5410. Email pete@allscales.com a photo of both ends — the cell boss and the indicator plug — plus the length you still have. We will match the connector or tell you we cannot.

How we match length and the connector in Cypress

The live listing supports a length and a wire count. It does not print a color pinout. We will not invent red-green-white-black here. This is the bench process we actually run.

  • Confirm the cell is an LPD-100K / LPD-CT-100K disk, not an S-type and not a shear beam. The load cells leaf is 30 SKUs. Wrong family, wrong cable.

  • Measure the remaining jacket. The kit cable is 20 ft, 4-wire. If you need 30 ft to reach a safe indicator stand, say so. We will not cut a 15 ft floor-scale homerun and call it done.

  • Photograph the connector at the indicator and at the cell. Thread, pin count, and whether it is a pigtail or a circular plug matter.

  • Read 4 mV/V and 385 / 350 Ω off the live spec if the tag is gone. A 3 mV/V shear beam is a different excitation story.

  • Do not splice in the pit with household wire. Bring the cell to 21249 FM 529 Rd or ship the head. We would rather see it than guess.

Sister load-cell catalog: ek1200i load cells. If the job is a 10,000 lb tension kit instead of a compression disk, start with 10,000 lb crane scale chooser. After a cable swap we can talk a check load: Houston calibration call. Process kit — if you need trade, read NTEP in Texas.

The failure we see most is not a clean open. It is a 2 lb jump that comes and goes when the jacket flexes at the cell boss. That is a broken conductor inside a 20 ft 4-wire, not a new disk. Photograph the boss, the indicator plug, and a ruler on the remaining jacket. We match from those three pictures. If you cannot send pictures, bring the cell to 21249 FM 529 Rd. Always MNM Scales on the replacement we ship.

What fails when you grab a look-alike cable

A four-pin floor-scale lead that fits in the hand does not mean the LPD disk will read. Reversed excitation is how a 100,000 lb cell comes back noisy or dead. We have seen both. Match the LPD family, the 20 ft 4-wire, and the plug. Always MNM Scales on the carton we ship.

FAQ

Can I add an LPD cable to the cart?

Not tonight. No live LPD cable SKU. Call (832) 766-5410. The 20 ft 4-wire is in the $1,250 kit. A spare is call-in.

Is this legal for trade?

The assembled kit page says no — process compression kit. Do not sell by this weight without a different NTEP system.

Who do I call?

All Scales USA / MNM Scales, 21249 FM 529 Rd, Cypress, TX 77433. (832) 766-5410. pete@allscales.com. Also: (281) 656-2666 · (832) 290-3120.

 
 
 

Comments


bottom of page